We conduct business all around the globe. Select a pin from the map or select by region or mooring type below.
Project Listing
- All
- Africa
- Americas
- Asia Pacific
- Europe
- Middle East
SOFEC is responsible for the design and procurement of a spread mooring system for the FPSO Bacalhau, at the Bacalhau field, Block BM-S-8 located iin the giant “pre-salt” region of the Santos Basin some 185 kilometers off the coast of the municipality of Ilhabela/SP, in the state of São Paulo.
SOFEC will design, construct, and fabricate an external turret for the Sangomar (formerly SNE) Field Development Phase 1 project located in the Sangomar Offshore and Sangomar Offshore Deep oil blocks, located offshore Senegal.
SOFEC is responsible for the design and procurement of a spread mooring system for the FPSO Anita Garibaldi – MV33 which will be deployed at the Marlim Field in the Campos Basin, in the northern region of the Rio de Janeiro State, 150 km off the coast.
SOFEC is responsible for the design and procurement of a spread mooring system for the FPSO Almirante Barroso – MV32 which will be deployed at the Buzios Field of the Santos Basin, offshore Brazil.
SOFEC designed, constructed, and fabricated a Disconnectable Tower Yoke Mooring System for the FPSO Eni Mexico Area 1 which is deployed in the Amoca – Area 1 Field some 10 km off the coast of Mexico.
SOFEC has been awarded the Lufeng Permanent Reinstatement Project Provision of Turret System by CNOOC China Limited. The system is a Disconnectable Turret System that will be integrated into a replacement FSOU and moored to the existing Lufeng 13-2 Field Moorings in the South China Sea.
SOFEC is responsible for the design and procurement of a spread mooring system for the FPSO Guanabara – MV31 which will be deployed at the Mero (formerly Libra) Field in Santos Basin, offshore Brazil.
SOFEC is responsible for the design and procurement of a spread mooring system for the FPSO Carioca – MV30 which will be deployed at the Sépia Field in Santos Basin, offshore Brazil.
SOFEC designed, constructed, fabricated and installed an External Turret and Turret Support Structure for the Benchamas 2 FSO. The Benchamas Field is located offshore in the Bay of Thailand in approximately 71m water depth.
SOFEC was responsible for the engineering, procurement and construction of five (5) CALM Buoys and associated anchor chain legs, PLEMs, piles, hoses, mooring hawsers, and all ancillaries in accordance with Oil Companies International Maine Forum (OCIMF) Guidelines.
SOFEC was responsible for the engineering, procurement and construction of five (5) CALM Buoys and associated anchor chain legs, PLEMs, piles, hoses, mooring hawsers, and all ancillaries in accordance with Oil Companies International Maine Forum (OCIMF) Guidelines.
SOFEC designed, constructed, fabricated and installed a permanent internal turret for the FSO Ailsa (Maersk Culzean).
SOFEC designed, constructed, fabricated and will install an External Turret and Turret Support Structure for the Hess North Malay Basin FSO.
SOFEC designed and procured a spread mooring system for the FPSO Cidade de Campos dos Goytaczes – MV29 located in the BM-C-
36 (Tartaruga Verde and Tartaruga Mestica fields, Campos Basin) offshore Brazil.
SOFEC designed, constructed and supplied two Catenary Anchor Leg Mooring (CALM) Buoy systems for Saudi Arabian Oil Company to be installed in Jazan, Saudi Arabia.
SOFEC designed, constructed, fabricateed and installed a Catenary Anchor Leg Mooring (CALM) Buoy System.
SOFEC designed, constructed and supplied a Catenary Anchor Leg Mooring (CALM) Buoy system for the Nghi Son Refinery and Petrochemical project located about 200 kilometers (120 mi) south of Hanoi in Tinh Gia District of Thanh Hóa Province
SOFEC designed and procured a spread mooring system for the FPSO Cidade de Caraguatatuba – MV27 which is deployed in the BM-S-9 (Carioca field, Campos Basin) offshore Brazil.
SOFEC designed and fabricated an external mooring system for the FPSO Prof. John Evans Atta Mills (Tullow TEN) and also assisted with the installation and commissioning. The FPSO is located in the Tweneboa, Enyenra, and Ntomme (TEN) fields offshore Ghana.
SOFEC designed and procured a spread mooring system for the FPSO Cidade de Itaguai – MV26 which is deployed in the BM-S-11 (Lula- Iracema Norte field, Campos Basin) offshore Brazil.
SOFEC designed, constructed, fabricated and delivered an external mooring system complete with anchor chains and anchor piles.
SOFEC designed, constructed, fabricated and delivered an external mooring system complete with anchor chains and anchor piles.
SOFEC designed, constructed, and fabricated the HOEGH Tower Yoke Mooring which is a development of an LNG Floating Storage and Regasification Unit [FSRU] and associated facilities located near Labuhan Maringgai, Indonesia.
SOFEC designed and supplied three replacement Catenary Anchor Leg Mooring (CALM) Buoys for PEMEX REFINACIÓN in Mexico, at the Rosarito, Tuxpan and Salina Cruz.
SOFEC designed and supplied three replacement Catenary Anchor Leg Mooring (CALM) Buoys for PEMEX REFINACIÓN in Mexico, at the Rosarito, Tuxpan and Salina Cruz.
SOFEC designed and supplied three replacement Catenary Anchor Leg Mooring (CALM) Buoys for PEMEX REFINACIÓN in Mexico, at the Rosarito, Tuxpan and Salina Cruz fields.
SOFEC designed and supplied three replacement Catenary Anchor Leg Mooring (CALM) Buoys for PEMEX REFINACIÓN in Mexico, at the Rosarito, Tuxpan and Salina Cruz fields.
SOFEC designed and supplied three replacement Catenary Anchor Leg Mooring (CALM) Buoys for PEMEX REFINACIÓN in Mexico, at the Rosarito, Tuxpan and Salina Cruz fields.
SOFEC designed and procured a tower yoke mooring system for the Cepu oil and gas block located near Bojonegoro, East Java, Indonesia.
SOFEC designed, constructed, fabricated and delivered an external mooring system for the FSO UOTE.
SOFEC designed and procured a spread mooring system for the FPSO Cidade de Mangaratiba – MV24 located in the Cernambi Sul field in Santos Basin.
SOFEC will design, construct and installea CALM terminal for crude oil, bunker fuel, gasoil, kerosene and gasoline and fuel oil.
SOFEC designed and procured a tower yoke mooring system for the HYSY113 FPSO.
SOFEC designed, constructed and supplied an external cantilevered bow turret system for a 357,000 dwt FPSO vessel. The OSX-3 FPSO is located within block BM-C-39 of the Campos Basin, offshore Brazil, on the Waikiki Pero Inga fields in 110m water depth.
Under contract to IHI Corporation, SOFEC was responsible for the design and construction of an external turret system and flexible riser system. SOFEC’s responsibilities included the design of the subsea pile-based pipeline end manifold (PLEM) and turret support structure (TSS).
SOFEC designed, constructed, and installed a CALM Buoy system for the SHELL Malampaya Deep Water Gas to Power project.
SOFEC designed and procured a spread mooring system for the FPSO Cidade de São Paulo – MV23 which is deployed in the Guará field in Santos Basin.
SOFEC designed, constructed, and supplied one (1) Catenary Anchor Leg Mooring (CALM) system for Oil Search Limited to be installed in the Gulf of Papua, Papua New Guinea.
SOFEC designed, constructed, and supplied one (1) Catenary Anchor Leg Mooring (CALM) system for Nagarjuna Oil Corporation Limited (NOCL) to be installed in the southeast coastal waters of India, 24km south of the town of Cuddalore, in Tamil Nadu state.
SOFEC designed, constructed, fabricated and supplied an
external turret mooring system for Hoang Long Joint Operating Company (HLJOC), a partnership comprising of Petrovietnam, Soco International, PTTEP and OPECO.
SOFEC designed, constructed, fabricated and delivered an external turret mooring system for a 272,000 dwt MODEC-converted FPSO. This is the first FPSO installed on the Jubilee Field, one of the largest oil fields discovered in West Africa in the past decade. This is one of the largest external turrets on an FPSO application.
SOFEC designed and procured a spread mooring system for the FPSO Cidade de Angra dos Reis MV22 in the giant Tupi area in Brazil’s vast pre-salt reserves of the Santos Basin.
SOFEC designed, constructed, fabricated and installed an external turret mooring system complete with anchor legs, fluid swivels and installation aids.
SOFEC designed spread mooring piles, mooring legs, pull-in and installation equipment for the FPSO.
SOFEC designed and procured a spread mooring system for the FPSO.
SOFEC designed, constructed, and shipped a replacement CALM Buoy for the system SOFEC installed in 1994 for Statia Terminals, N.V. in Tumble Down Dick Bay on the Northwest side of the Island of St, Eustatius.
SOFEC will design, supply and install two Catenary Anchor Leg Mooring (CALM) systems for Inti Karya Persada Tehnik (IKPT) near the Tuban field, offshore Indonesia.
SOFEC will design, supply and install two Catenary Anchor Leg Mooring (CALM) systems for Inti Karya Persada Tehnik (IKPT) near the Tuban field, offshore Indonesia.
SOFEC will designed, supplied and installed a Catenary Anchor Leg Mooring (CALM) system for the Bharat Oman Refinery project in the Bina Refinery field, on Indias northwest coast.
SOFEC designed, constructed and supplied a disconnectable internal turret mooring system to moor a 148,500 dwt MODEC converted Aframax FPSO in 200m water depth.
SOFEC designed and supplied a spread mooring system to moor a MODEC-owned 62,000 dwt FPSO. This vessel is located in Block 46/02 of the Song Doc field approximately 170km offshore Vietnam.
SOFEC will design, supply and install an interchangeable CALM Buoy system for the Caleta Olivia & Caleta Cordova fields offshore Argentina.
SOFEC designed, provided analysis and procurement of a spread mooring system to moor a 258,000 dwt MODEC converted VLCC FPSO located in the Jubarti field of the Campos Basin offshore Brazil.
SOFEC designed, constructed and supplied an external turret mooring system to moor a 52,000 dwt MODEC-newbuild FSO in 60m water depth.
SOFEC will redesign the existing CALM buoy piping systems and upgraded the design pressure rating of the two Kuwait Oil Company CALM Buoys.
Muzeiliu Nafta Butinge terminal purchased and installed a replacement buoy for their terminal operations in the Baltic Sea.
SOFEC designed, constructed and supplied a disconnectable internal turret mooring system to moor a 150,000 dwt MODEC-newbuild FPSO in 825m water depth.
In December of 2002 SOFEC was awarded design, supply and installation of five offshore loading stations for transportation of crude oil and condensate from onshore facilities for Sonatrach TRC, the Oil and Gas Company, in Algeria.
SOFEC designed, constructed and supplied an external turret mooring system to moor a 350,000 dwt MODEC-converted FSO vessel to receive, store and offload oil produced by the PRA-1 Platform and nearby oil fields in the Campos Basin, Brazil.
SOFEC designed and supplied the spread mooring system for a MODEC-owned 264,148 dwt FPSO located in the 1-RJS-409 / 3-RJS-415 Espadarte Sul field offshore Brazil’s Campos.
SOFEC designed and constructed an external turret mooring system to moor a 45,000 dwt MODEC-newbuild FSO located approximately 320km off the Nam Con Son Basin, Vietnam.
This SOFEC external turret mooring system was designed, constructed and supplied for the MODEC-owned “Buffalo Venture” FPSO from December 1999 to December 2004 when operations of the FPSO expired.
SOFEC designed and constructed a disconnectable internal turret mooring system to moor a 150,000 dwt MODEC-converted FPSO in 156m water depth.
SOFEC designed and constructed an external turret mooring system to moor a 357,000 dwt MODEC-converted FPSO in 970m water depth.
Contracted through Hyundai Heavy Industries, SOFEC was responsible for the design and analysis of the Kizomba B FPSO spread mooring system.
In December of 2002 SOFEC was awarded design, supply and installation of five offshore loading stations for transportation of crude oil and condensate from onshore facilities for Sonatrach TRC, the Oil and Gas Company, in Algeria.
In December of 2002 SOFEC was awarded design, supply and installation of five offshore loading stations for transportation of crude oil and condensate from onshore facilities for Sonatrach TRC, the Oil and Gas Company, in Algeria.
SOFEC designed and constructed an external turret mooring system to moor the 149,500 dwt MODEC purpose-built FPSO.
SOFEC designed and supplied two CALM Buoy systems for the OCP pipeline project in Ecuador.
SOFEC designed and supplied two CALM Buoy systems for the OCP pipeline project in Ecuador.
SOFEC designed and constructed an external turret mooring system for a MODEC purpose-built 60,000 dwt FSO in 78m water depth in the Bongkot Gas Field, Gulf of Thailand.
SOFEC was responsible for the design and analysis of the SOFEC spread mooring system for the world’s largest FPSO.
SOFEC designed and provided project management for a tower yoke mooring system for a new 172,000 dwt purpose-built double-hull vessel.
SOFEC designed and provided project management for a tower yoke mooring system for a 357,000 dwt MODEC-converted ULCC tanker for the Chad development project offshore Cameroon, West Africa.
SOFEC designed, constructed and supplied an external cantilevered bow turret mooring system for a 357,000 dwt FPSO vessel to produce the Bijupirá & Salema fields in the Campos Basin, Brazil.
SOFEC designed and supplied the spread mooring anchor lines, onvessel chain support and installation equipment for the 35,000 dwt MV8 Langsa Venture FPSO for MEDCO MOECO Langsa Ltd.
SOFEC designed, constructed, and installed a CALM Buoy system for the SHELL Malampaya Deep Water Gas to Power project.
SOFEC designed, constructed and supplied an external turret mooring system for a MODEC purpose built 150,000 dwt FSO in 47m water depth in the White Tiger field.
SOFEC designed, constructed, and installed a CALM Buoy system to accommodate up to 450,000 dwt tankers.
SOFEC supplied a 12.5m diameter CALM buoy from its stock buoy program to replace a non-SOFEC® buoy that had experienced premature failure in service.
SOFEC designed, constructed and supplied an external turret mooring system for a MODEC-converted 103,000 dwt FPSO in BHP Petroleum’s Buffalo oil field, located in Western Australia’s sector of the Timor Sea.
Designed, constructed and installed a replacement CALM system to accommodate 35,000 to 85,000 dwt tankers in 20m water depth. The system is linked via four 18-in. pipelines to a refinery located two miles away.
SOFEC designed and constructed a CALM system located in 25m water depth to export diluted or refined crude oil and gas oil products to the 96,920 dwt tanker and import naphtha diluent from tankers to shore.
SOFEC designed and constructed a CALM system to accommodate a 96,920 dwt tanker for operation in a cold weather environment.
The FSO Ta’Kuntah is a MODEC converted 357,000 dwt ULCC tanker with a SOFEC external turret mooring system
SOFEC designed and supplied the 12-leg anchoring system and deckmounted equipment including chain supports and jacking system for a permanent spread mooring system for installation on a MODEC converted 139,000 dwt FSO vessel.
SOFEC designed and engineered an internal disconnectable turret system in the Terra Nova FPSO.
SOFEC designed and constructed an internal permanent turret mooring system for a 283,000 dwt deepwater FPSO located in the Albacora field of the Campos Basin offshore Brazil.
SOFEC designed, constructed, and installed a CALM Buoy system to accommodate up to 450,000 dwt tankers.
SOFEC designed and supplied a permanent spread mooring system for installation on an Early Production System (EPS) in 112m water depth for Chevron’s Nemba Field Development off Cabinda, Angola.
SOFEC designed and constructed an internal permanent turret for a deepwater FPSO installed on the Barracuda and Caratinga fields offshore Brazil.
SOFEC designed and constructed an external turret mooring system for a MODEC purpose-built FSO installed in 42m water depth.
SOFEC designed and constructed an external cantilevered bow turret for a MODEC-converted 135,510 dwt FPSO in 110m water depth. The facility is classed by Lloyd’s Register of Shipping.
SOFEC designed and fabricated a second CALM system for import of refined products for power generators in Mexico.
SOFEC designed, constructed, and installed a CALM system for crude oil import and product export as part of a trans-ship-ment terminal facility.
SOFEC designed, constructed, and installed an internal permanent turret mooring system for the MODEC-converted 140,000 dwt Nan Hai Sheng Li FPSO.
SOFEC designed, constructed and delivered a CALM system for condensate loading for the 350 MMscfd Pagerungen Besar Island Gas Field Development Project offshore Pagerungan in the Kangean Islands, Indonesia.
This project included the design and construction of a hydraulically power driven, rotating assembly consisting of main bearing unit, fluid swivel and electrical swivel for an oil loading monotower.
SOFEC designed and constructed an internal disconnectable turret mooring system to moor a MODEC-converted 121,361 dwt FSO vessel in the typhoon alley area offshore People’s Republic of China.
SOFEC designed and constructed the complete CALM terminal with a dual product swivel for the Talinpu Refinery at Kaohsiung, Taiwan.
SOFEC designed, constructed, and installed a CALM terminal for crude oil exports at the Tanker Berth No. 3, Das Island, Abu Dhabi, United Arab Emirates.
SOFEC designed and constructed a CALM buoy system for crude oil import and bunker fuel export.
SOFEC designed and constructed a CALM terminal for LPG and NGL service.
SOFEC designed and constructed an external turret-type SPM system for the Anoa Natuna, which was MODEC’s first purpose-built FPSO system.
The SOFEC CALM system was designed and fabricated to import heavy fuel oil feedstock for a power plant.
SOFEC designed and constructed an external cantilevered turret mooring system for a permanently moored FPSO conversion.
SOFEC developed, designed and constructed an external turret-type SPM system for a 409,000 dwt tanker that serves as an FSO terminal for crude oil.
SOFEC designed, fabricated and tested each of these units to identical specifications. Various critical components are completely interchangeable to simplify logistical support requirements.
SOFEC designed, constructed and installed a CALM terminal for crude oil, bunker fuel, gasoil, kerosene and gasoline and fuel oil.
This unique Rapid Depolyment SALM (RA-DE SALM®) was developed based on SOFEC commercially available SPM technology.
SOFEC designed, constructed and delivered a replacement CALM for crude oil import.
SOFEC designed, constructed, and supervised installation of a second SALM terminal for strategic crude oil storage facility.
SOFEC designed, constructed, and supervised installation of the first SALM terminal for strategic crude oil storage facility.
SOFEC designed, constructed, and supervised installation of a SALM to operate in ice-laden water to import fuel, diesel and Mogas.
SOFEC designed and constructed a multi-product CALM terminal and two PLEMs and also designed the four 18-in. pipelines, which link the terminal to a refinery two miles away.
SOFEC designed, fabricated, and installed a SALM terminal in Manila.
SOFEC designed, constructed, and installed a SALM terminal to import heavy fuel oil for distribution in North west Spain.
SOFEC designed, constructed, and supervised installation of the SPM #102, SPM #103 and SPM #104 SALMs for unloading tankers up to the ULCC for the first domestic deep-water “superport”.
SOFEC designed, constructed, and supervised installation of two SPMs for 750,000 dwt tanker (ULCC’s).
The Tembungo terminal was the flagship of SOFEC SALMs. Installed in 1974, the terminal operated continuously through the late 1980’s.
- All
- CALM Buoys
- External Turret
- Internal Disconnectable Turret
- Internal Permanent Turret
- SALM Buoys
- Spread Mooring
- Tower Yoke
SOFEC is responsible for the design and procurement of a spread mooring system for the FPSO Bacalhau, at the Bacalhau field, Block BM-S-8 located iin the giant “pre-salt” region of the Santos Basin some 185 kilometers off the coast of the municipality of Ilhabela/SP, in the state of São Paulo.
SOFEC will design, construct, and fabricate an external turret for the Sangomar (formerly SNE) Field Development Phase 1 project located in the Sangomar Offshore and Sangomar Offshore Deep oil blocks, located offshore Senegal.
SOFEC is responsible for the design and procurement of a spread mooring system for the FPSO Anita Garibaldi – MV33 which will be deployed at the Marlim Field in the Campos Basin, in the northern region of the Rio de Janeiro State, 150 km off the coast.
SOFEC is responsible for the design and procurement of a spread mooring system for the FPSO Almirante Barroso – MV32 which will be deployed at the Buzios Field of the Santos Basin, offshore Brazil.
SOFEC designed, constructed, and fabricated a Disconnectable Tower Yoke Mooring System for the FPSO Eni Mexico Area 1 which is deployed in the Amoca – Area 1 Field some 10 km off the coast of Mexico.
SOFEC has been awarded the Lufeng Permanent Reinstatement Project Provision of Turret System by CNOOC China Limited. The system is a Disconnectable Turret System that will be integrated into a replacement FSOU and moored to the existing Lufeng 13-2 Field Moorings in the South China Sea.
SOFEC is responsible for the design and procurement of a spread mooring system for the FPSO Guanabara – MV31 which will be deployed at the Mero (formerly Libra) Field in Santos Basin, offshore Brazil.
SOFEC is responsible for the design and procurement of a spread mooring system for the FPSO Carioca – MV30 which will be deployed at the Sépia Field in Santos Basin, offshore Brazil.
SOFEC designed, constructed, fabricated and installed an External Turret and Turret Support Structure for the Benchamas 2 FSO. The Benchamas Field is located offshore in the Bay of Thailand in approximately 71m water depth.
SOFEC was responsible for the engineering, procurement and construction of five (5) CALM Buoys and associated anchor chain legs, PLEMs, piles, hoses, mooring hawsers, and all ancillaries in accordance with Oil Companies International Maine Forum (OCIMF) Guidelines.
SOFEC was responsible for the engineering, procurement and construction of five (5) CALM Buoys and associated anchor chain legs, PLEMs, piles, hoses, mooring hawsers, and all ancillaries in accordance with Oil Companies International Maine Forum (OCIMF) Guidelines.
SOFEC designed, constructed, fabricated and installed a permanent internal turret for the FSO Ailsa (Maersk Culzean).
SOFEC designed, constructed, fabricated and will install an External Turret and Turret Support Structure for the Hess North Malay Basin FSO.
SOFEC designed and procured a spread mooring system for the FPSO Cidade de Campos dos Goytaczes – MV29 located in the BM-C-
36 (Tartaruga Verde and Tartaruga Mestica fields, Campos Basin) offshore Brazil.
SOFEC designed, constructed and supplied two Catenary Anchor Leg Mooring (CALM) Buoy systems for Saudi Arabian Oil Company to be installed in Jazan, Saudi Arabia.
SOFEC designed, constructed, fabricateed and installed a Catenary Anchor Leg Mooring (CALM) Buoy System.
SOFEC designed, constructed and supplied a Catenary Anchor Leg Mooring (CALM) Buoy system for the Nghi Son Refinery and Petrochemical project located about 200 kilometers (120 mi) south of Hanoi in Tinh Gia District of Thanh Hóa Province
SOFEC designed and procured a spread mooring system for the FPSO Cidade de Caraguatatuba – MV27 which is deployed in the BM-S-9 (Carioca field, Campos Basin) offshore Brazil.
SOFEC designed and fabricated an external mooring system for the FPSO Prof. John Evans Atta Mills (Tullow TEN) and also assisted with the installation and commissioning. The FPSO is located in the Tweneboa, Enyenra, and Ntomme (TEN) fields offshore Ghana.
SOFEC designed and procured a spread mooring system for the FPSO Cidade de Itaguai – MV26 which is deployed in the BM-S-11 (Lula- Iracema Norte field, Campos Basin) offshore Brazil.
SOFEC designed, constructed, fabricated and delivered an external mooring system complete with anchor chains and anchor piles.
SOFEC designed, constructed, fabricated and delivered an external mooring system complete with anchor chains and anchor piles.
SOFEC designed, constructed, and fabricated the HOEGH Tower Yoke Mooring which is a development of an LNG Floating Storage and Regasification Unit [FSRU] and associated facilities located near Labuhan Maringgai, Indonesia.
SOFEC designed and supplied three replacement Catenary Anchor Leg Mooring (CALM) Buoys for PEMEX REFINACIÓN in Mexico, at the Rosarito, Tuxpan and Salina Cruz.
SOFEC designed and supplied three replacement Catenary Anchor Leg Mooring (CALM) Buoys for PEMEX REFINACIÓN in Mexico, at the Rosarito, Tuxpan and Salina Cruz.
SOFEC designed and supplied three replacement Catenary Anchor Leg Mooring (CALM) Buoys for PEMEX REFINACIÓN in Mexico, at the Rosarito, Tuxpan and Salina Cruz fields.
SOFEC designed and supplied three replacement Catenary Anchor Leg Mooring (CALM) Buoys for PEMEX REFINACIÓN in Mexico, at the Rosarito, Tuxpan and Salina Cruz fields.
SOFEC designed and supplied three replacement Catenary Anchor Leg Mooring (CALM) Buoys for PEMEX REFINACIÓN in Mexico, at the Rosarito, Tuxpan and Salina Cruz fields.
SOFEC designed and procured a tower yoke mooring system for the Cepu oil and gas block located near Bojonegoro, East Java, Indonesia.
SOFEC designed, constructed, fabricated and delivered an external mooring system for the FSO UOTE.
SOFEC designed and procured a spread mooring system for the FPSO Cidade de Mangaratiba – MV24 located in the Cernambi Sul field in Santos Basin.
SOFEC will design, construct and installea CALM terminal for crude oil, bunker fuel, gasoil, kerosene and gasoline and fuel oil.
SOFEC designed and procured a tower yoke mooring system for the HYSY113 FPSO.
SOFEC designed, constructed and supplied an external cantilevered bow turret system for a 357,000 dwt FPSO vessel. The OSX-3 FPSO is located within block BM-C-39 of the Campos Basin, offshore Brazil, on the Waikiki Pero Inga fields in 110m water depth.
Under contract to IHI Corporation, SOFEC was responsible for the design and construction of an external turret system and flexible riser system. SOFEC’s responsibilities included the design of the subsea pile-based pipeline end manifold (PLEM) and turret support structure (TSS).
SOFEC designed, constructed, and installed a CALM Buoy system for the SHELL Malampaya Deep Water Gas to Power project.
SOFEC designed and procured a spread mooring system for the FPSO Cidade de São Paulo – MV23 which is deployed in the Guará field in Santos Basin.
SOFEC designed, constructed, and supplied one (1) Catenary Anchor Leg Mooring (CALM) system for Oil Search Limited to be installed in the Gulf of Papua, Papua New Guinea.
SOFEC designed, constructed, and supplied one (1) Catenary Anchor Leg Mooring (CALM) system for Nagarjuna Oil Corporation Limited (NOCL) to be installed in the southeast coastal waters of India, 24km south of the town of Cuddalore, in Tamil Nadu state.
SOFEC designed, constructed, fabricated and supplied an
external turret mooring system for Hoang Long Joint Operating Company (HLJOC), a partnership comprising of Petrovietnam, Soco International, PTTEP and OPECO.
SOFEC designed, constructed, fabricated and delivered an external turret mooring system for a 272,000 dwt MODEC-converted FPSO. This is the first FPSO installed on the Jubilee Field, one of the largest oil fields discovered in West Africa in the past decade. This is one of the largest external turrets on an FPSO application.
SOFEC designed and procured a spread mooring system for the FPSO Cidade de Angra dos Reis MV22 in the giant Tupi area in Brazil’s vast pre-salt reserves of the Santos Basin.
SOFEC designed, constructed, fabricated and installed an external turret mooring system complete with anchor legs, fluid swivels and installation aids.
SOFEC designed spread mooring piles, mooring legs, pull-in and installation equipment for the FPSO.
SOFEC designed and procured a spread mooring system for the FPSO.
SOFEC designed, constructed, and shipped a replacement CALM Buoy for the system SOFEC installed in 1994 for Statia Terminals, N.V. in Tumble Down Dick Bay on the Northwest side of the Island of St, Eustatius.
SOFEC will design, supply and install two Catenary Anchor Leg Mooring (CALM) systems for Inti Karya Persada Tehnik (IKPT) near the Tuban field, offshore Indonesia.
SOFEC will design, supply and install two Catenary Anchor Leg Mooring (CALM) systems for Inti Karya Persada Tehnik (IKPT) near the Tuban field, offshore Indonesia.
SOFEC will designed, supplied and installed a Catenary Anchor Leg Mooring (CALM) system for the Bharat Oman Refinery project in the Bina Refinery field, on Indias northwest coast.
SOFEC designed, constructed and supplied a disconnectable internal turret mooring system to moor a 148,500 dwt MODEC converted Aframax FPSO in 200m water depth.
SOFEC designed and supplied a spread mooring system to moor a MODEC-owned 62,000 dwt FPSO. This vessel is located in Block 46/02 of the Song Doc field approximately 170km offshore Vietnam.
SOFEC will design, supply and install an interchangeable CALM Buoy system for the Caleta Olivia & Caleta Cordova fields offshore Argentina.
SOFEC designed, provided analysis and procurement of a spread mooring system to moor a 258,000 dwt MODEC converted VLCC FPSO located in the Jubarti field of the Campos Basin offshore Brazil.
SOFEC designed, constructed and supplied an external turret mooring system to moor a 52,000 dwt MODEC-newbuild FSO in 60m water depth.
SOFEC will redesign the existing CALM buoy piping systems and upgraded the design pressure rating of the two Kuwait Oil Company CALM Buoys.
Muzeiliu Nafta Butinge terminal purchased and installed a replacement buoy for their terminal operations in the Baltic Sea.
SOFEC designed, constructed and supplied a disconnectable internal turret mooring system to moor a 150,000 dwt MODEC-newbuild FPSO in 825m water depth.
In December of 2002 SOFEC was awarded design, supply and installation of five offshore loading stations for transportation of crude oil and condensate from onshore facilities for Sonatrach TRC, the Oil and Gas Company, in Algeria.
SOFEC designed, constructed and supplied an external turret mooring system to moor a 350,000 dwt MODEC-converted FSO vessel to receive, store and offload oil produced by the PRA-1 Platform and nearby oil fields in the Campos Basin, Brazil.
SOFEC designed and supplied the spread mooring system for a MODEC-owned 264,148 dwt FPSO located in the 1-RJS-409 / 3-RJS-415 Espadarte Sul field offshore Brazil’s Campos.
SOFEC designed and constructed an external turret mooring system to moor a 45,000 dwt MODEC-newbuild FSO located approximately 320km off the Nam Con Son Basin, Vietnam.
This SOFEC external turret mooring system was designed, constructed and supplied for the MODEC-owned “Buffalo Venture” FPSO from December 1999 to December 2004 when operations of the FPSO expired.
SOFEC designed and constructed a disconnectable internal turret mooring system to moor a 150,000 dwt MODEC-converted FPSO in 156m water depth.
SOFEC designed and constructed an external turret mooring system to moor a 357,000 dwt MODEC-converted FPSO in 970m water depth.
Contracted through Hyundai Heavy Industries, SOFEC was responsible for the design and analysis of the Kizomba B FPSO spread mooring system.
In December of 2002 SOFEC was awarded design, supply and installation of five offshore loading stations for transportation of crude oil and condensate from onshore facilities for Sonatrach TRC, the Oil and Gas Company, in Algeria.
In December of 2002 SOFEC was awarded design, supply and installation of five offshore loading stations for transportation of crude oil and condensate from onshore facilities for Sonatrach TRC, the Oil and Gas Company, in Algeria.
SOFEC designed and constructed an external turret mooring system to moor the 149,500 dwt MODEC purpose-built FPSO.
SOFEC designed and supplied two CALM Buoy systems for the OCP pipeline project in Ecuador.
SOFEC designed and supplied two CALM Buoy systems for the OCP pipeline project in Ecuador.
SOFEC designed and constructed an external turret mooring system for a MODEC purpose-built 60,000 dwt FSO in 78m water depth in the Bongkot Gas Field, Gulf of Thailand.
SOFEC was responsible for the design and analysis of the SOFEC spread mooring system for the world’s largest FPSO.
SOFEC designed and provided project management for a tower yoke mooring system for a new 172,000 dwt purpose-built double-hull vessel.
SOFEC designed and provided project management for a tower yoke mooring system for a 357,000 dwt MODEC-converted ULCC tanker for the Chad development project offshore Cameroon, West Africa.
SOFEC designed, constructed and supplied an external cantilevered bow turret mooring system for a 357,000 dwt FPSO vessel to produce the Bijupirá & Salema fields in the Campos Basin, Brazil.
SOFEC designed and supplied the spread mooring anchor lines, onvessel chain support and installation equipment for the 35,000 dwt MV8 Langsa Venture FPSO for MEDCO MOECO Langsa Ltd.
SOFEC designed, constructed, and installed a CALM Buoy system for the SHELL Malampaya Deep Water Gas to Power project.
SOFEC designed, constructed and supplied an external turret mooring system for a MODEC purpose built 150,000 dwt FSO in 47m water depth in the White Tiger field.
SOFEC designed, constructed, and installed a CALM Buoy system to accommodate up to 450,000 dwt tankers.
SOFEC supplied a 12.5m diameter CALM buoy from its stock buoy program to replace a non-SOFEC® buoy that had experienced premature failure in service.
SOFEC designed, constructed and supplied an external turret mooring system for a MODEC-converted 103,000 dwt FPSO in BHP Petroleum’s Buffalo oil field, located in Western Australia’s sector of the Timor Sea.
Designed, constructed and installed a replacement CALM system to accommodate 35,000 to 85,000 dwt tankers in 20m water depth. The system is linked via four 18-in. pipelines to a refinery located two miles away.
SOFEC designed and constructed a CALM system located in 25m water depth to export diluted or refined crude oil and gas oil products to the 96,920 dwt tanker and import naphtha diluent from tankers to shore.
SOFEC designed and constructed a CALM system to accommodate a 96,920 dwt tanker for operation in a cold weather environment.
The FSO Ta’Kuntah is a MODEC converted 357,000 dwt ULCC tanker with a SOFEC external turret mooring system
SOFEC designed and supplied the 12-leg anchoring system and deckmounted equipment including chain supports and jacking system for a permanent spread mooring system for installation on a MODEC converted 139,000 dwt FSO vessel.
SOFEC designed and engineered an internal disconnectable turret system in the Terra Nova FPSO.
SOFEC designed and constructed an internal permanent turret mooring system for a 283,000 dwt deepwater FPSO located in the Albacora field of the Campos Basin offshore Brazil.
SOFEC designed, constructed, and installed a CALM Buoy system to accommodate up to 450,000 dwt tankers.
SOFEC designed and supplied a permanent spread mooring system for installation on an Early Production System (EPS) in 112m water depth for Chevron’s Nemba Field Development off Cabinda, Angola.
SOFEC designed and constructed an internal permanent turret for a deepwater FPSO installed on the Barracuda and Caratinga fields offshore Brazil.
SOFEC designed and constructed an external turret mooring system for a MODEC purpose-built FSO installed in 42m water depth.
SOFEC designed and constructed an external cantilevered bow turret for a MODEC-converted 135,510 dwt FPSO in 110m water depth. The facility is classed by Lloyd’s Register of Shipping.
SOFEC designed and fabricated a second CALM system for import of refined products for power generators in Mexico.
SOFEC designed, constructed, and installed a CALM system for crude oil import and product export as part of a trans-ship-ment terminal facility.
SOFEC designed, constructed, and installed an internal permanent turret mooring system for the MODEC-converted 140,000 dwt Nan Hai Sheng Li FPSO.
SOFEC designed, constructed and delivered a CALM system for condensate loading for the 350 MMscfd Pagerungen Besar Island Gas Field Development Project offshore Pagerungan in the Kangean Islands, Indonesia.
This project included the design and construction of a hydraulically power driven, rotating assembly consisting of main bearing unit, fluid swivel and electrical swivel for an oil loading monotower.
SOFEC designed and constructed an internal disconnectable turret mooring system to moor a MODEC-converted 121,361 dwt FSO vessel in the typhoon alley area offshore People’s Republic of China.
SOFEC designed and constructed the complete CALM terminal with a dual product swivel for the Talinpu Refinery at Kaohsiung, Taiwan.
SOFEC designed, constructed, and installed a CALM terminal for crude oil exports at the Tanker Berth No. 3, Das Island, Abu Dhabi, United Arab Emirates.
SOFEC designed and constructed a CALM buoy system for crude oil import and bunker fuel export.
SOFEC designed and constructed a CALM terminal for LPG and NGL service.
SOFEC designed and constructed an external turret-type SPM system for the Anoa Natuna, which was MODEC’s first purpose-built FPSO system.
The SOFEC CALM system was designed and fabricated to import heavy fuel oil feedstock for a power plant.
SOFEC designed and constructed an external cantilevered turret mooring system for a permanently moored FPSO conversion.
SOFEC developed, designed and constructed an external turret-type SPM system for a 409,000 dwt tanker that serves as an FSO terminal for crude oil.
SOFEC designed, fabricated and tested each of these units to identical specifications. Various critical components are completely interchangeable to simplify logistical support requirements.
SOFEC designed, constructed and installed a CALM terminal for crude oil, bunker fuel, gasoil, kerosene and gasoline and fuel oil.
This unique Rapid Depolyment SALM (RA-DE SALM®) was developed based on SOFEC commercially available SPM technology.
SOFEC designed, constructed and delivered a replacement CALM for crude oil import.
SOFEC designed, constructed, and supervised installation of a second SALM terminal for strategic crude oil storage facility.
SOFEC designed, constructed, and supervised installation of the first SALM terminal for strategic crude oil storage facility.
SOFEC designed, constructed, and supervised installation of a SALM to operate in ice-laden water to import fuel, diesel and Mogas.
SOFEC designed and constructed a multi-product CALM terminal and two PLEMs and also designed the four 18-in. pipelines, which link the terminal to a refinery two miles away.
SOFEC designed, fabricated, and installed a SALM terminal in Manila.
SOFEC designed, constructed, and installed a SALM terminal to import heavy fuel oil for distribution in North west Spain.
SOFEC designed, constructed, and supervised installation of the SPM #102, SPM #103 and SPM #104 SALMs for unloading tankers up to the ULCC for the first domestic deep-water “superport”.
SOFEC designed, constructed, and supervised installation of two SPMs for 750,000 dwt tanker (ULCC’s).
The Tembungo terminal was the flagship of SOFEC SALMs. Installed in 1974, the terminal operated continuously through the late 1980’s.
-
By Region
-
- All
- Africa
- Americas
- Asia Pacific
- Europe
- Middle East
SOFEC is responsible for the design and procurement of a spread mooring system for the FPSO Bacalhau, at the Bacalhau field, Block BM-S-8 located iin the giant “pre-salt” region of the Santos Basin some 185 kilometers off the coast of the municipality of Ilhabela/SP, in the state of São Paulo.
Project Location: Bacalhau Field, Santos Basin BrazilProject Contract Awarded: January 2020Project Type: Spread MooringProject Region: AmericasSOFEC will design, construct, and fabricate an external turret for the Sangomar (formerly SNE) Field Development Phase 1 project located in the Sangomar Offshore and Sangomar Offshore Deep oil blocks, located offshore Senegal.
Project Location: Dakar, SenegalProject Contract Awarded: December 2019Project Type: External TurretProject Region: AfricaSOFEC is responsible for the design and procurement of a spread mooring system for the FPSO Anita Garibaldi – MV33 which will be deployed at the Marlim Field in the Campos Basin, in the northern region of the Rio de Janeiro State, 150 km off the coast.
Project Location: Marlim Field, Campos Basin, BrazilProject Contract Awarded: Oct 2019Project Type: Spread MooringProject Region: AmericasSOFEC is responsible for the design and procurement of a spread mooring system for the FPSO Almirante Barroso – MV32 which will be deployed at the Buzios Field of the Santos Basin, offshore Brazil.
Project Location: Buzios Field, Campos Basin, BrazilProject Contract Awarded: Sept 2019Project Type: Spread MooringProject Region: AmericasSOFEC designed, constructed, and fabricated a Disconnectable Tower Yoke Mooring System for the FPSO Eni Mexico Area 1 which is deployed in the Amoca – Area 1 Field some 10 km off the coast of Mexico.
Project Location: Area 1 Field, Gulf of MexicoProject Contract Awarded: Oct 2018Project Type: Tower YokeProject Region: AmericasSOFEC has been awarded the Lufeng Permanent Reinstatement Project Provision of Turret System by CNOOC China Limited. The system is a Disconnectable Turret System that will be integrated into a replacement FSOU and moored to the existing Lufeng 13-2 Field Moorings in the South China Sea.
Project Location: Lufeng 13-2 Field - People's Republic of ChinaProject Contract Awarded: Aug 2018Project Type: Internal Disconnectable TurretProject Region: Asia PacificSOFEC is responsible for the design and procurement of a spread mooring system for the FPSO Guanabara – MV31 which will be deployed at the Mero (formerly Libra) Field in Santos Basin, offshore Brazil.
Project Location: Mero(Libra) Field - Santos Basin, BrazilProject Contract Awarded: Dec 2017Project Type: Spread MooringProject Region: AmericasSOFEC is responsible for the design and procurement of a spread mooring system for the FPSO Carioca – MV30 which will be deployed at the Sépia Field in Santos Basin, offshore Brazil.
Project Location: Sepia Field, Santos Basin, BrazilProject Contract Awarded: Oct 2017Project Type: Spread MooringProject Region: AmericasSOFEC designed, constructed, fabricated and installed an External Turret and Turret Support Structure for the Benchamas 2 FSO. The Benchamas Field is located offshore in the Bay of Thailand in approximately 71m water depth.
Project Location: Benchamas Field, Gulf of ThailandProject Contract Awarded: Aug 2016Project Type: External TurretProject Region: Asia PacificSOFEC was responsible for the engineering, procurement and construction of five (5) CALM Buoys and associated anchor chain legs, PLEMs, piles, hoses, mooring hawsers, and all ancillaries in accordance with Oil Companies International Maine Forum (OCIMF) Guidelines.
Project Location: Port of Lekki, NigeriaProject Contract Awarded: Aug 2016Project Type: CALM BuoysProject Region: AfricaSOFEC was responsible for the engineering, procurement and construction of five (5) CALM Buoys and associated anchor chain legs, PLEMs, piles, hoses, mooring hawsers, and all ancillaries in accordance with Oil Companies International Maine Forum (OCIMF) Guidelines.
Project Location: Port of Lekki, NigeriaProject Contract Awarded: Aug 2016Project Type: CALM BuoysProject Region: AfricaSOFEC designed, constructed, fabricated and installed a permanent internal turret for the FSO Ailsa (Maersk Culzean).
Project Location: Offshore UK North Sea - EuropeProject Contract Awarded: Sept 2015Project Type: Internal Permanent TurretProject Region: EuropeSOFEC designed, constructed, fabricated and will install an External Turret and Turret Support Structure for the Hess North Malay Basin FSO.
Project Location: North Malay Basin, MalaysiaProject Contract Awarded: March 2015Project Type: External TurretProject Region: Asia PacificSOFEC designed and procured a spread mooring system for the FPSO Cidade de Campos dos Goytaczes – MV29 located in the BM-C-
36 (Tartaruga Verde and Tartaruga Mestica fields, Campos Basin) offshore Brazil.Project Location: Tartaruga Verde and Tataruga Mestica Fields, BrazilProject Contract Awarded: Nov 2014Project Type: Spread MooringProject Region: AmericasSOFEC designed, constructed and supplied two Catenary Anchor Leg Mooring (CALM) Buoy systems for Saudi Arabian Oil Company to be installed in Jazan, Saudi Arabia.
Project Location: Jazan, Saudi ArabiaProject Contract Awarded: May 2014Project Type: CALM BuoysProject Region: Middle EastSOFEC designed, constructed, fabricateed and installed a Catenary Anchor Leg Mooring (CALM) Buoy System.
Project Location: Ras Issa Penninsula, Red Sea, YemenProject Contract Awarded: April 2014Project Type: CALM BuoysProject Region: Middle EastSOFEC designed, constructed and supplied a Catenary Anchor Leg Mooring (CALM) Buoy system for the Nghi Son Refinery and Petrochemical project located about 200 kilometers (120 mi) south of Hanoi in Tinh Gia District of Thanh Hóa Province
Project Location: Ngih Son VietnamProject Contract Awarded: March 2014Project Type: CALM BuoysProject Region: Asia PacificSOFEC designed and procured a spread mooring system for the FPSO Cidade de Caraguatatuba – MV27 which is deployed in the BM-S-9 (Carioca field, Campos Basin) offshore Brazil.
Project Location: Carioca Field, Campos Basin, BrazilProject Contract Awarded: Sept 2013Project Type: Spread MooringProject Region: AmericasSOFEC designed and fabricated an external mooring system for the FPSO Prof. John Evans Atta Mills (Tullow TEN) and also assisted with the installation and commissioning. The FPSO is located in the Tweneboa, Enyenra, and Ntomme (TEN) fields offshore Ghana.
Project Location: Tweneboa, Enyenra Ntomme (TEN) Fields, GhanaProject Contract Awarded: Aug 2013Project Type: External TurretProject Region: AfricaSOFEC designed and procured a spread mooring system for the FPSO Cidade de Itaguai – MV26 which is deployed in the BM-S-11 (Lula- Iracema Norte field, Campos Basin) offshore Brazil.
Project Location: Campos Basin, BrazilProject Contract Awarded: Jan 2013Project Type: Spread MooringProject Region: AmericasSOFEC designed, constructed, fabricated and delivered an external mooring system complete with anchor chains and anchor piles.
Project Location: Kumang-Kanowit Field, MalaysiaProject Contract Awarded: Dec 2012Project Type: External TurretProject Region: Asia PacificSOFEC designed, constructed, fabricated and delivered an external mooring system complete with anchor chains and anchor piles.
Project Location: Rotan Field, MalaysiaProject Contract Awarded: Dec 2012Project Type: External TurretProject Region: Asia PacificSOFEC designed, constructed, and fabricated the HOEGH Tower Yoke Mooring which is a development of an LNG Floating Storage and Regasification Unit [FSRU] and associated facilities located near Labuhan Maringgai, Indonesia.
Project Location: Lampung Field, IndonesiaProject Contract Awarded: Nov 2012Project Type: Tower YokeProject Region: Asia PacificSOFEC designed and supplied three replacement Catenary Anchor Leg Mooring (CALM) Buoys for PEMEX REFINACIÓN in Mexico, at the Rosarito, Tuxpan and Salina Cruz.
Project Location: Salina Cruz Terminal, MexicoProject Contract Awarded: April 2012Project Type: CALM BuoysProject Region: AmericasSOFEC designed and supplied three replacement Catenary Anchor Leg Mooring (CALM) Buoys for PEMEX REFINACIÓN in Mexico, at the Rosarito, Tuxpan and Salina Cruz.
Project Location: Tuxpan Terminal, MexicoProject Contract Awarded: April 2012Project Type: CALM BuoysProject Region: AmericasSOFEC designed and supplied three replacement Catenary Anchor Leg Mooring (CALM) Buoys for PEMEX REFINACIÓN in Mexico, at the Rosarito, Tuxpan and Salina Cruz fields.
Project Location: Rosarita Terminal, Baja CaliforniaProject Contract Awarded: April 2012Project Type: CALM BuoysProject Region: AmericasSOFEC designed and supplied three replacement Catenary Anchor Leg Mooring (CALM) Buoys for PEMEX REFINACIÓN in Mexico, at the Rosarito, Tuxpan and Salina Cruz fields.
Project Location: Tuxpan Terminal, MexicoProject Contract Awarded: April 2012Project Type: CALM BuoysProject Region: AmericasSOFEC designed and supplied three replacement Catenary Anchor Leg Mooring (CALM) Buoys for PEMEX REFINACIÓN in Mexico, at the Rosarito, Tuxpan and Salina Cruz fields.
Project Location: Salina Cruz Terminal, MexicoProject Contract Awarded: April 2012Project Type: CALM BuoysProject Region: AmericasSOFEC designed and procured a tower yoke mooring system for the Cepu oil and gas block located near Bojonegoro, East Java, Indonesia.
Project Location: Banyu Urip Field, IndonesiaProject Contract Awarded: Jan 2012Project Type: Tower YokeProject Region: Asia PacificSOFEC designed, constructed, fabricated and delivered an external mooring system for the FSO UOTE.
Project Location: UOTE Field, BrazilProject Contract Awarded: Jan 2012Project Type: External TurretProject Region: AmericasSOFEC designed and procured a spread mooring system for the FPSO Cidade de Mangaratiba – MV24 located in the Cernambi Sul field in Santos Basin.
Project Location: Cernambi South Field, BrazilProject Contract Awarded: Sept 2011Project Type: Spread MooringProject Region: AmericasSOFEC will design, construct and installea CALM terminal for crude oil, bunker fuel, gasoil, kerosene and gasoline and fuel oil.
Project Location: Barber's Point, Hawaii, USAProject Contract Awarded: Sept 2011Project Type: CALM BuoysProject Region: AmericasSOFEC designed and procured a tower yoke mooring system for the HYSY113 FPSO.
Project Location: BZ25-1S Field, ChinaProject Contract Awarded: July 2011Project Type: Tower YokeProject Region: Asia PacificSOFEC designed, constructed and supplied an external cantilevered bow turret system for a 357,000 dwt FPSO vessel. The OSX-3 FPSO is located within block BM-C-39 of the Campos Basin, offshore Brazil, on the Waikiki Pero Inga fields in 110m water depth.
Project Location: Waikiki Pero Inga Fields, BrazilProject Contract Awarded: June 2011Project Type: External TurretProject Region: AmericasUnder contract to IHI Corporation, SOFEC was responsible for the design and construction of an external turret system and flexible riser system. SOFEC’s responsibilities included the design of the subsea pile-based pipeline end manifold (PLEM) and turret support structure (TSS).
Project Location: Erawan Field, Gulf of ThailandProject Contract Awarded: Jan 2011Project Type: External TurretProject Region: Asia PacificSOFEC designed, constructed, and installed a CALM Buoy system for the SHELL Malampaya Deep Water Gas to Power project.
Project Location: Palawan Island, PhilippinesProject Contract Awarded: Nov 2010Project Type: CALM BuoysProject Region: Asia PacificSOFEC designed and procured a spread mooring system for the FPSO Cidade de São Paulo – MV23 which is deployed in the Guará field in Santos Basin.
Project Location: Guara Field, BrazilProject Contract Awarded: June 2010Project Type: Spread MooringProject Region: AmericasSOFEC designed, constructed, and supplied one (1) Catenary Anchor Leg Mooring (CALM) system for Oil Search Limited to be installed in the Gulf of Papua, Papua New Guinea.
Project Location: Gulf of Papua, New GuineaProject Contract Awarded: June 2010Project Type: CALM BuoysProject Region: Asia PacificSOFEC designed, constructed, and supplied one (1) Catenary Anchor Leg Mooring (CALM) system for Nagarjuna Oil Corporation Limited (NOCL) to be installed in the southeast coastal waters of India, 24km south of the town of Cuddalore, in Tamil Nadu state.
Project Location: Nagarjuna, IndiaProject Contract Awarded: June 2010Project Type: CALM BuoysProject Region: Asia PacificSOFEC designed, constructed, fabricated and supplied an
external turret mooring system for Hoang Long Joint Operating Company (HLJOC), a partnership comprising of Petrovietnam, Soco International, PTTEP and OPECO.Project Location: Te Giac Trang (TGT) Field, VietnamProject Contract Awarded: Feb 2010Project Type: External TurretProject Region: Asia PacificSOFEC designed, constructed, fabricated and delivered an external turret mooring system for a 272,000 dwt MODEC-converted FPSO. This is the first FPSO installed on the Jubilee Field, one of the largest oil fields discovered in West Africa in the past decade. This is one of the largest external turrets on an FPSO application.
Project Location: Jubilee Field, GhanaProject Contract Awarded: Sept 2008Project Type: External TurretProject Region: AfricaSOFEC designed and procured a spread mooring system for the FPSO Cidade de Angra dos Reis MV22 in the giant Tupi area in Brazil’s vast pre-salt reserves of the Santos Basin.
Project Location: Tupi Field, BrazilProject Contract Awarded: Aug 2008Project Type: Spread MooringProject Region: AmericasSOFEC designed, constructed, fabricated and installed an external turret mooring system complete with anchor legs, fluid swivels and installation aids.
Project Location: Plutao, Saturno, Venus and Marte Fields, AngolaProject Contract Awarded: June 2008Project Type: External TurretProject Region: AfricaSOFEC designed spread mooring piles, mooring legs, pull-in and installation equipment for the FPSO.
Project Location: Gulf of Guinea - Block 17 Field, AngolaProject Contract Awarded: March 2008Project Type: Spread MooringProject Region: AfricaSOFEC designed and procured a spread mooring system for the FPSO.
Project Location: Urugua / Tambau Fields, BrazilProject Contract Awarded: Feb 2008Project Type: Spread MooringProject Region: AmericasSOFEC designed, constructed, and shipped a replacement CALM Buoy for the system SOFEC installed in 1994 for Statia Terminals, N.V. in Tumble Down Dick Bay on the Northwest side of the Island of St, Eustatius.
Project Location: St. Eustatius, Netherland AntillesProject Contract Awarded: Oct 2007Project Type: CALM BuoysProject Region: AmericasSOFEC will design, supply and install two Catenary Anchor Leg Mooring (CALM) systems for Inti Karya Persada Tehnik (IKPT) near the Tuban field, offshore Indonesia.
Project Location: Tuban Field, IndonesiaProject Contract Awarded: Sept 2007Project Type: CALM BuoysProject Region: Asia PacificSOFEC will design, supply and install two Catenary Anchor Leg Mooring (CALM) systems for Inti Karya Persada Tehnik (IKPT) near the Tuban field, offshore Indonesia.
Project Location: Tuban Field, IndonesiaProject Contract Awarded: Sept 2007Project Type: CALM BuoysProject Region: Asia PacificSOFEC will designed, supplied and installed a Catenary Anchor Leg Mooring (CALM) system for the Bharat Oman Refinery project in the Bina Refinery field, on Indias northwest coast.
Project Location: Bina Refinery Field, IndiaProject Contract Awarded: Sept 2007Project Type: CALM BuoysProject Region: Asia PacificSOFEC designed, constructed and supplied a disconnectable internal turret mooring system to moor a 148,500 dwt MODEC converted Aframax FPSO in 200m water depth.
Project Location: Pyrenees Field, AustraliaProject Contract Awarded: July 2007Project Type: Internal Disconnectable TurretProject Region: Asia PacificSOFEC designed and supplied a spread mooring system to moor a MODEC-owned 62,000 dwt FPSO. This vessel is located in Block 46/02 of the Song Doc field approximately 170km offshore Vietnam.
Project Location: Song Doc Field, VietnamProject Contract Awarded: March 2007Project Type: Spread MooringProject Region: Asia PacificSOFEC will design, supply and install an interchangeable CALM Buoy system for the Caleta Olivia & Caleta Cordova fields offshore Argentina.
Project Location: Caleta Olivia and Caleta Cordova Fields, ArgentinaProject Contract Awarded: Feb 2007Project Type: CALM BuoysProject Region: AmericasSOFEC designed, provided analysis and procurement of a spread mooring system to moor a 258,000 dwt MODEC converted VLCC FPSO located in the Jubarti field of the Campos Basin offshore Brazil.
Project Location: Jubarti Field, Campos Basin, BrazilProject Contract Awarded: Dec 2006Project Type: Spread MooringProject Region: AmericasSOFEC designed, constructed and supplied an external turret mooring system to moor a 52,000 dwt MODEC-newbuild FSO in 60m water depth.
Project Location: Rang Dong Field, VietnamProject Contract Awarded: July 2006Project Type: External TurretProject Region: Asia PacificSOFEC will redesign the existing CALM buoy piping systems and upgraded the design pressure rating of the two Kuwait Oil Company CALM Buoys.
Project Location: Mina al Ahmadi, KuwaitProject Contract Awarded: May 1995Project Type: CALM BuoysProject Region: Middle EastMuzeiliu Nafta Butinge terminal purchased and installed a replacement buoy for their terminal operations in the Baltic Sea.
Project Location: Butinge Terminal, LithuaniaProject Contract Awarded: April 2006Project Type: CALM BuoysProject Region: EuropeSOFEC designed, constructed and supplied a disconnectable internal turret mooring system to moor a 150,000 dwt MODEC-newbuild FPSO in 825m water depth.
Project Location: Stybarrow Field, AustraliaProject Contract Awarded: March 2006Project Type: Internal Disconnectable TurretProject Region: Asia PacificIn December of 2002 SOFEC was awarded design, supply and installation of five offshore loading stations for transportation of crude oil and condensate from onshore facilities for Sonatrach TRC, the Oil and Gas Company, in Algeria.
Project Location: Algeria - North AfricaProject Contract Awarded: Dec 2002Project Type: CALM BuoysProject Region: AfricaSOFEC designed, constructed and supplied an external turret mooring system to moor a 350,000 dwt MODEC-converted FSO vessel to receive, store and offload oil produced by the PRA-1 Platform and nearby oil fields in the Campos Basin, Brazil.
Project Location: Marlim Sul, Roncador, Marlim Leste Fields, BrazilProject Contract Awarded: Dec 2005Project Type: External TurretProject Region: AmericasSOFEC designed and supplied the spread mooring system for a MODEC-owned 264,148 dwt FPSO located in the 1-RJS-409 / 3-RJS-415 Espadarte Sul field offshore Brazil’s Campos.
Project Location: Espadarte Sul Field, BrazilProject Contract Awarded: July 2005Project Type: Spread MooringProject Region: AmericasSOFEC designed and constructed an external turret mooring system to moor a 45,000 dwt MODEC-newbuild FSO located approximately 320km off the Nam Con Son Basin, Vietnam.
Project Location: Rong Doi / Rong Doi Tay Fields, VietnamProject Contract Awarded: May 2005Project Type: External TurretProject Region: Asia PacificThis SOFEC external turret mooring system was designed, constructed and supplied for the MODEC-owned “Buffalo Venture” FPSO from December 1999 to December 2004 when operations of the FPSO expired.
Project Location: Jasmine Field, ThailandProject Contract Awarded: Dec 2004Project Type: External TurretProject Region: Asia PacificSOFEC designed and constructed a disconnectable internal turret mooring system to moor a 150,000 dwt MODEC-converted FPSO in 156m water depth.
Project Location: Mutineer-Exeter Fields, AustraliaProject Contract Awarded: Oct 2003Project Type: Internal Disconnectable TurretProject Region: Asia PacificSOFEC designed and constructed an external turret mooring system to moor a 357,000 dwt MODEC-converted FPSO in 970m water depth.
Project Location: Baobab Block CI-40 Field, Cote d' IvoireProject Contract Awarded: July 2003Project Type: External TurretProject Region: AfricaContracted through Hyundai Heavy Industries, SOFEC was responsible for the design and analysis of the Kizomba B FPSO spread mooring system.
Project Location: Kizomba B Field, Block 15, AngolaProject Contract Awarded: March 2003Project Type: Spread MooringProject Region: AfricaIn December of 2002 SOFEC was awarded design, supply and installation of five offshore loading stations for transportation of crude oil and condensate from onshore facilities for Sonatrach TRC, the Oil and Gas Company, in Algeria.
Project Location: Algeria - North AfricaProject Contract Awarded: Dec 2002Project Type: CALM BuoysProject Region: AfricaIn December of 2002 SOFEC was awarded design, supply and installation of five offshore loading stations for transportation of crude oil and condensate from onshore facilities for Sonatrach TRC, the Oil and Gas Company, in Algeria.
Project Location: Algeria- North AfricaProject Contract Awarded: Dec 2002Project Type: CALM BuoysProject Region: AfricaSOFEC designed and constructed an external turret mooring system to moor the 149,500 dwt MODEC purpose-built FPSO.
Project Location: Su Tu Den (Black Lion) Field, VietnamProject Contract Awarded: May 2002Project Type: External TurretProject Region: Asia PacificSOFEC designed and supplied two CALM Buoy systems for the OCP pipeline project in Ecuador.
Project Location: Balo Terminal, EcuadorProject Contract Awarded: Dec 2001Project Type: CALM BuoysProject Region: AmericasSOFEC designed and supplied two CALM Buoy systems for the OCP pipeline project in Ecuador.
Project Location: Balao Terminal, EcuadorProject Contract Awarded: Dec 2001Project Type: CALM BuoysProject Region: AmericasSOFEC designed and constructed an external turret mooring system for a MODEC purpose-built 60,000 dwt FSO in 78m water depth in the Bongkot Gas Field, Gulf of Thailand.
Project Location: Bongkot Field, Gulf of ThailandProject Contract Awarded: Aug 2001Project Type: External TurretProject Region: Asia PacificSOFEC was responsible for the design and analysis of the SOFEC spread mooring system for the world’s largest FPSO.
Project Location: Kizomba A Field, Block 15, AngolaProject Contract Awarded: Aug 2001Project Type: Spread MooringProject Region: AfricaSOFEC designed and provided project management for a tower yoke mooring system for a new 172,000 dwt purpose-built double-hull vessel.
Project Location: Qinhuangdao (QHD32-6) Field, ChinaProject Contract Awarded: Dec 1999Project Type: Tower YokeProject Region: Asia PacificSOFEC designed and provided project management for a tower yoke mooring system for a 357,000 dwt MODEC-converted ULCC tanker for the Chad development project offshore Cameroon, West Africa.
Project Location: Bolobo/Miandoum/Kome Fields, CameroonProject Contract Awarded: July 2001Project Type: Tower YokeProject Region: AfricaSOFEC designed, constructed and supplied an external cantilevered bow turret mooring system for a 357,000 dwt FPSO vessel to produce the Bijupirá & Salema fields in the Campos Basin, Brazil.
Project Location: Bijupira and Salema Fields, Campos Basin, BrazilProject Contract Awarded: May 2001Project Type: External TurretProject Region: AmericasSOFEC designed and supplied the spread mooring anchor lines, onvessel chain support and installation equipment for the 35,000 dwt MV8 Langsa Venture FPSO for MEDCO MOECO Langsa Ltd.
Project Location: Langsa Field, IndonesiaProject Contract Awarded: March 2001Project Type: Spread MooringProject Region: Asia PacificSOFEC designed, constructed, and installed a CALM Buoy system for the SHELL Malampaya Deep Water Gas to Power project.
Project Location: Palawan Island, PhilippinesProject Contract Awarded: Nov 1999Project Type: CALM BuoysProject Region: Asia PacificSOFEC designed, constructed and supplied an external turret mooring system for a MODEC purpose built 150,000 dwt FSO in 47m water depth in the White Tiger field.
Project Location: White Tiger Field, VietnamProject Contract Awarded: Oct 1999Project Type: External TurretProject Region: Asia PacificSOFEC designed, constructed, and installed a CALM Buoy system to accommodate up to 450,000 dwt tankers.
Project Location: Jebel Dhanna, United Arab EmiratesProject Contract Awarded: Oct 1998Project Type: CALM BuoysProject Region: Middle EastSOFEC supplied a 12.5m diameter CALM buoy from its stock buoy program to replace a non-SOFEC® buoy that had experienced premature failure in service.
Project Location: RAVVA Field, IndiaProject Contract Awarded: Oct 1998Project Type: CALM BuoysProject Region: Asia PacificSOFEC designed, constructed and supplied an external turret mooring system for a MODEC-converted 103,000 dwt FPSO in BHP Petroleum’s Buffalo oil field, located in Western Australia’s sector of the Timor Sea.
Project Location: Buffalo Field, AustraliaProject Contract Awarded: Oct 1998Project Type: External TurretProject Region: Asia PacificDesigned, constructed and installed a replacement CALM system to accommodate 35,000 to 85,000 dwt tankers in 20m water depth. The system is linked via four 18-in. pipelines to a refinery located two miles away.
Project Location: Kerteh, West MalaysiaProject Contract Awarded: April 1998Project Type: CALM BuoysProject Region: Asia PacificSOFEC designed and constructed a CALM system located in 25m water depth to export diluted or refined crude oil and gas oil products to the 96,920 dwt tanker and import naphtha diluent from tankers to shore.
Project Location: Jose, VenezuelaProject Contract Awarded: Nov 1997Project Type: CALM BuoysProject Region: AmericasSOFEC designed and constructed a CALM system to accommodate a 96,920 dwt tanker for operation in a cold weather environment.
Project Location: Butinge Terminal, LithuaniaProject Contract Awarded: Nov 1997Project Type: CALM BuoysProject Region: EuropeThe FSO Ta’Kuntah is a MODEC converted 357,000 dwt ULCC tanker with a SOFEC external turret mooring system
Project Location: Canterell Field, Bay of Campeche, MexicoProject Contract Awarded: June 1997Project Type: External TurretProject Region: AmericasSOFEC designed and supplied the 12-leg anchoring system and deckmounted equipment including chain supports and jacking system for a permanent spread mooring system for installation on a MODEC converted 139,000 dwt FSO vessel.
Project Location: Tchatamba Marine -1 Field, GabonProject Contract Awarded: March 1997Project Type: Spread MooringProject Region: AfricaSOFEC designed and engineered an internal disconnectable turret system in the Terra Nova FPSO.
Project Location: Terra Nova Field, CanadaProject Contract Awarded: Jan 1997Project Type: Internal Disconnectable TurretProject Region: AmericasSOFEC designed and constructed an internal permanent turret mooring system for a 283,000 dwt deepwater FPSO located in the Albacora field of the Campos Basin offshore Brazil.
Project Location: Albacora Field, BrazilProject Contract Awarded: Feb 1996Project Type: Internal Permanent TurretProject Region: AmericasSOFEC designed, constructed, and installed a CALM Buoy system to accommodate up to 450,000 dwt tankers.
Project Location: Jebel Dhanna, United Arab EmiratesProject Contract Awarded: March 1995Project Type: CALM BuoysProject Region: Middle EastSOFEC designed and supplied a permanent spread mooring system for installation on an Early Production System (EPS) in 112m water depth for Chevron’s Nemba Field Development off Cabinda, Angola.
Project Location: Nemba Field, AngolaProject Contract Awarded: March 1995Project Type: Spread MooringProject Region: AfricaSOFEC designed and constructed an internal permanent turret for a deepwater FPSO installed on the Barracuda and Caratinga fields offshore Brazil.
Project Location: Barracuda and Caratinga Fields, BrazilProject Contract Awarded: Feb 1995Project Type: Internal Permanent TurretProject Region: AmericasSOFEC designed and constructed an external turret mooring system for a MODEC purpose-built FSO installed in 42m water depth.
Project Location: Escravos Field, NigeriaProject Contract Awarded: Feb 1995Project Type: External TurretProject Region: AfricaSOFEC designed and constructed an external cantilevered bow turret for a MODEC-converted 135,510 dwt FPSO in 110m water depth. The facility is classed by Lloyd’s Register of Shipping.
Project Location: Maui B Field, New ZealandProject Contract Awarded: Jan 1995Project Type: External TurretProject Region: Asia PacificSOFEC designed and fabricated a second CALM system for import of refined products for power generators in Mexico.
Project Location: Tuxpan, MexicoProject Contract Awarded: Jan 1994Project Type: CALM BuoysProject Region: AmericasSOFEC designed, constructed, and installed a CALM system for crude oil import and product export as part of a trans-ship-ment terminal facility.
Project Location: St. Eustatius, Netherland AntillesProject Contract Awarded: Oct 1993Project Type: CALM BuoysProject Region: AmericasSOFEC designed, constructed, and installed an internal permanent turret mooring system for the MODEC-converted 140,000 dwt Nan Hai Sheng Li FPSO.
Project Location: Liuhua 11-1 Field, People's Republic of ChinaProject Contract Awarded: July 1993Project Type: Internal Permanent TurretProject Region: Asia PacificSOFEC designed, constructed and delivered a CALM system for condensate loading for the 350 MMscfd Pagerungen Besar Island Gas Field Development Project offshore Pagerungan in the Kangean Islands, Indonesia.
Project Location: Kangean Islands, IndonesiaProject Contract Awarded: June 1992Project Type: CALM BuoysProject Region: Asia PacificThis project included the design and construction of a hydraulically power driven, rotating assembly consisting of main bearing unit, fluid swivel and electrical swivel for an oil loading monotower.
Project Location: Dutch North Sea, The NetherlandsProject Contract Awarded: June 1992Project Type: SALM BuoysProject Region: EuropeSOFEC designed and constructed an internal disconnectable turret mooring system to moor a MODEC-converted 121,361 dwt FSO vessel in the typhoon alley area offshore People’s Republic of China.
Project Location: Lufeng 13-1 Field, People's Republic of ChinaProject Contract Awarded: Feb 1992Project Type: Internal Disconnectable TurretProject Region: Asia PacificSOFEC designed and constructed the complete CALM terminal with a dual product swivel for the Talinpu Refinery at Kaohsiung, Taiwan.
Project Location: Kaohsiung, TaiwanProject Contract Awarded: June 1991Project Type: CALM BuoysProject Region: Asia PacificSOFEC designed, constructed, and installed a CALM terminal for crude oil exports at the Tanker Berth No. 3, Das Island, Abu Dhabi, United Arab Emirates.
Project Location: Das Island, United Arab EmiratesProject Contract Awarded: November 1990Project Type: CALM BuoysProject Region: Middle EastSOFEC designed and constructed a CALM buoy system for crude oil import and bunker fuel export.
Project Location: Kaohsiung, TaiwanProject Contract Awarded: July 1990Project Type: CALM BuoysProject Region: Asia PacificSOFEC designed and constructed a CALM terminal for LPG and NGL service.
Project Location: Surat, IndiaProject Contract Awarded: June 1989Project Type: CALM BuoysProject Region: Asia PacificSOFEC designed and constructed an external turret-type SPM system for the Anoa Natuna, which was MODEC’s first purpose-built FPSO system.
Project Location: Anoa Field, IndonesiaProject Contract Awarded: Oct 1988Project Type: External TurretProject Region: Asia PacificThe SOFEC CALM system was designed and fabricated to import heavy fuel oil feedstock for a power plant.
Project Location: Tuxpan, MexicoProject Contract Awarded: Jan 1988Project Type: CALM BuoysProject Region: AmericasSOFEC designed and constructed an external cantilevered turret mooring system for a permanently moored FPSO conversion.
Project Location: Malong Anding / Sotong Anding (MASA) Fields, MalaysiaProject Contract Awarded: Jan 1998Project Type: External TurretProject Region: Asia PacificSOFEC developed, designed and constructed an external turret-type SPM system for a 409,000 dwt tanker that serves as an FSO terminal for crude oil.
Project Location: Saleef Field, YemenProject Contract Awarded: Aug 1986Project Type: External TurretProject Region: Middle EastSOFEC designed, fabricated and tested each of these units to identical specifications. Various critical components are completely interchangeable to simplify logistical support requirements.
Project Location: Worldwide, North AmericaProject Contract Awarded: June 1986Project Type: SALM BuoysProject Region: AmericasSOFEC designed, constructed and installed a CALM terminal for crude oil, bunker fuel, gasoil, kerosene and gasoline and fuel oil.
Project Location: Oahu Island, Hawaii, USAProject Contract Awarded: Feb 1986Project Type: CALM BuoysProject Region: AmericasThis unique Rapid Depolyment SALM (RA-DE SALM®) was developed based on SOFEC commercially available SPM technology.
Project Location: Worldwide, North AmericaProject Contract Awarded: September 1984Project Type: SALM BuoysProject Region: AmericasSOFEC designed, constructed and delivered a replacement CALM for crude oil import.
Project Location: Palenque, Dominican RepublicProject Contract Awarded: June 1984Project Type: CALM BuoysProject Region: AmericasSOFEC designed, constructed, and supervised installation of a second SALM terminal for strategic crude oil storage facility.
Project Location: Fukui, JapanProject Contract Awarded: June 1983Project Type: SALM BuoysProject Region: Asia PacificSOFEC designed, constructed, and supervised installation of the first SALM terminal for strategic crude oil storage facility.
Project Location: Mutsu, JapanProject Contract Awarded: June 1983Project Type: SALM BuoysProject Region: Asia PacificSOFEC designed, constructed, and supervised installation of a SALM to operate in ice-laden water to import fuel, diesel and Mogas.
Project Location: Fredrickshavn, DenmarkProject Contract Awarded: June 1982Project Type: SALM BuoysProject Region: EuropeSOFEC designed and constructed a multi-product CALM terminal and two PLEMs and also designed the four 18-in. pipelines, which link the terminal to a refinery two miles away.
Project Location: Kerteh, West MalaysiaProject Contract Awarded: Oct 1981Project Type: CALM BuoysProject Region: Asia PacificSOFEC designed, fabricated, and installed a SALM terminal in Manila.
Project Location: Luzan Island, PhilippinesProject Contract Awarded: June 1979Project Type: SALM BuoysProject Region: Asia PacificSOFEC designed, constructed, and installed a SALM terminal to import heavy fuel oil for distribution in North west Spain.
Project Location: Badalona, SpainProject Contract Awarded: June 1978Project Type: SALM BuoysProject Region: EuropeSOFEC designed, constructed, and supervised installation of the SPM #102, SPM #103 and SPM #104 SALMs for unloading tankers up to the ULCC for the first domestic deep-water “superport”.
Project Location: Gulf of Mexico, United States of AmericaProject Contract Awarded: June 1978Project Type: SALM BuoysProject Region: AmericasSOFEC designed, constructed, and supervised installation of two SPMs for 750,000 dwt tanker (ULCC’s).
Project Location: Ju' Aymah, Saudi ArabiaProject Contract Awarded: June 1975Project Type: SALM BuoysProject Region: Middle EastThe Tembungo terminal was the flagship of SOFEC SALMs. Installed in 1974, the terminal operated continuously through the late 1980’s.
Project Location: Offshore Sabah, MalaysiaProject Contract Awarded: June 1972Project Type: SALM BuoysProject Region: Asia Pacific -
By Type
-
- All
- CALM Buoys
- External Turret
- Internal Disconnectable Turret
- Internal Permanent Turret
- SALM Buoys
- Spread Mooring
- Tower Yoke
SOFEC is responsible for the design and procurement of a spread mooring system for the FPSO Bacalhau, at the Bacalhau field, Block BM-S-8 located iin the giant “pre-salt” region of the Santos Basin some 185 kilometers off the coast of the municipality of Ilhabela/SP, in the state of São Paulo.
Project Location: Bacalhau Field, Santos Basin BrazilProject Contract Awarded: January 2020Project Type: Spread MooringProject Region: AmericasSOFEC will design, construct, and fabricate an external turret for the Sangomar (formerly SNE) Field Development Phase 1 project located in the Sangomar Offshore and Sangomar Offshore Deep oil blocks, located offshore Senegal.
Project Location: Dakar, SenegalProject Contract Awarded: December 2019Project Type: External TurretProject Region: AfricaSOFEC is responsible for the design and procurement of a spread mooring system for the FPSO Anita Garibaldi – MV33 which will be deployed at the Marlim Field in the Campos Basin, in the northern region of the Rio de Janeiro State, 150 km off the coast.
Project Location: Marlim Field, Campos Basin, BrazilProject Contract Awarded: Oct 2019Project Type: Spread MooringProject Region: AmericasSOFEC is responsible for the design and procurement of a spread mooring system for the FPSO Almirante Barroso – MV32 which will be deployed at the Buzios Field of the Santos Basin, offshore Brazil.
Project Location: Buzios Field, Campos Basin, BrazilProject Contract Awarded: Sept 2019Project Type: Spread MooringProject Region: AmericasSOFEC designed, constructed, and fabricated a Disconnectable Tower Yoke Mooring System for the FPSO Eni Mexico Area 1 which is deployed in the Amoca – Area 1 Field some 10 km off the coast of Mexico.
Project Location: Area 1 Field, Gulf of MexicoProject Contract Awarded: Oct 2018Project Type: Tower YokeProject Region: AmericasSOFEC has been awarded the Lufeng Permanent Reinstatement Project Provision of Turret System by CNOOC China Limited. The system is a Disconnectable Turret System that will be integrated into a replacement FSOU and moored to the existing Lufeng 13-2 Field Moorings in the South China Sea.
Project Location: Lufeng 13-2 Field - People's Republic of ChinaProject Contract Awarded: Aug 2018Project Type: Internal Disconnectable TurretProject Region: Asia PacificSOFEC is responsible for the design and procurement of a spread mooring system for the FPSO Guanabara – MV31 which will be deployed at the Mero (formerly Libra) Field in Santos Basin, offshore Brazil.
Project Location: Mero(Libra) Field - Santos Basin, BrazilProject Contract Awarded: Dec 2017Project Type: Spread MooringProject Region: AmericasSOFEC is responsible for the design and procurement of a spread mooring system for the FPSO Carioca – MV30 which will be deployed at the Sépia Field in Santos Basin, offshore Brazil.
Project Location: Sepia Field, Santos Basin, BrazilProject Contract Awarded: Oct 2017Project Type: Spread MooringProject Region: AmericasSOFEC designed, constructed, fabricated and installed an External Turret and Turret Support Structure for the Benchamas 2 FSO. The Benchamas Field is located offshore in the Bay of Thailand in approximately 71m water depth.
Project Location: Benchamas Field, Gulf of ThailandProject Contract Awarded: Aug 2016Project Type: External TurretProject Region: Asia PacificSOFEC was responsible for the engineering, procurement and construction of five (5) CALM Buoys and associated anchor chain legs, PLEMs, piles, hoses, mooring hawsers, and all ancillaries in accordance with Oil Companies International Maine Forum (OCIMF) Guidelines.
Project Location: Port of Lekki, NigeriaProject Contract Awarded: Aug 2016Project Type: CALM BuoysProject Region: AfricaSOFEC was responsible for the engineering, procurement and construction of five (5) CALM Buoys and associated anchor chain legs, PLEMs, piles, hoses, mooring hawsers, and all ancillaries in accordance with Oil Companies International Maine Forum (OCIMF) Guidelines.
Project Location: Port of Lekki, NigeriaProject Contract Awarded: Aug 2016Project Type: CALM BuoysProject Region: AfricaSOFEC designed, constructed, fabricated and installed a permanent internal turret for the FSO Ailsa (Maersk Culzean).
Project Location: Offshore UK North Sea - EuropeProject Contract Awarded: Sept 2015Project Type: Internal Permanent TurretProject Region: EuropeSOFEC designed, constructed, fabricated and will install an External Turret and Turret Support Structure for the Hess North Malay Basin FSO.
Project Location: North Malay Basin, MalaysiaProject Contract Awarded: March 2015Project Type: External TurretProject Region: Asia PacificSOFEC designed and procured a spread mooring system for the FPSO Cidade de Campos dos Goytaczes – MV29 located in the BM-C-
36 (Tartaruga Verde and Tartaruga Mestica fields, Campos Basin) offshore Brazil.Project Location: Tartaruga Verde and Tataruga Mestica Fields, BrazilProject Contract Awarded: Nov 2014Project Type: Spread MooringProject Region: AmericasSOFEC designed, constructed and supplied two Catenary Anchor Leg Mooring (CALM) Buoy systems for Saudi Arabian Oil Company to be installed in Jazan, Saudi Arabia.
Project Location: Jazan, Saudi ArabiaProject Contract Awarded: May 2014Project Type: CALM BuoysProject Region: Middle EastSOFEC designed, constructed, fabricateed and installed a Catenary Anchor Leg Mooring (CALM) Buoy System.
Project Location: Ras Issa Penninsula, Red Sea, YemenProject Contract Awarded: April 2014Project Type: CALM BuoysProject Region: Middle EastSOFEC designed, constructed and supplied a Catenary Anchor Leg Mooring (CALM) Buoy system for the Nghi Son Refinery and Petrochemical project located about 200 kilometers (120 mi) south of Hanoi in Tinh Gia District of Thanh Hóa Province
Project Location: Ngih Son VietnamProject Contract Awarded: March 2014Project Type: CALM BuoysProject Region: Asia PacificSOFEC designed and procured a spread mooring system for the FPSO Cidade de Caraguatatuba – MV27 which is deployed in the BM-S-9 (Carioca field, Campos Basin) offshore Brazil.
Project Location: Carioca Field, Campos Basin, BrazilProject Contract Awarded: Sept 2013Project Type: Spread MooringProject Region: AmericasSOFEC designed and fabricated an external mooring system for the FPSO Prof. John Evans Atta Mills (Tullow TEN) and also assisted with the installation and commissioning. The FPSO is located in the Tweneboa, Enyenra, and Ntomme (TEN) fields offshore Ghana.
Project Location: Tweneboa, Enyenra Ntomme (TEN) Fields, GhanaProject Contract Awarded: Aug 2013Project Type: External TurretProject Region: AfricaSOFEC designed and procured a spread mooring system for the FPSO Cidade de Itaguai – MV26 which is deployed in the BM-S-11 (Lula- Iracema Norte field, Campos Basin) offshore Brazil.
Project Location: Campos Basin, BrazilProject Contract Awarded: Jan 2013Project Type: Spread MooringProject Region: AmericasSOFEC designed, constructed, fabricated and delivered an external mooring system complete with anchor chains and anchor piles.
Project Location: Kumang-Kanowit Field, MalaysiaProject Contract Awarded: Dec 2012Project Type: External TurretProject Region: Asia PacificSOFEC designed, constructed, fabricated and delivered an external mooring system complete with anchor chains and anchor piles.
Project Location: Rotan Field, MalaysiaProject Contract Awarded: Dec 2012Project Type: External TurretProject Region: Asia PacificSOFEC designed, constructed, and fabricated the HOEGH Tower Yoke Mooring which is a development of an LNG Floating Storage and Regasification Unit [FSRU] and associated facilities located near Labuhan Maringgai, Indonesia.
Project Location: Lampung Field, IndonesiaProject Contract Awarded: Nov 2012Project Type: Tower YokeProject Region: Asia PacificSOFEC designed and supplied three replacement Catenary Anchor Leg Mooring (CALM) Buoys for PEMEX REFINACIÓN in Mexico, at the Rosarito, Tuxpan and Salina Cruz.
Project Location: Salina Cruz Terminal, MexicoProject Contract Awarded: April 2012Project Type: CALM BuoysProject Region: AmericasSOFEC designed and supplied three replacement Catenary Anchor Leg Mooring (CALM) Buoys for PEMEX REFINACIÓN in Mexico, at the Rosarito, Tuxpan and Salina Cruz.
Project Location: Tuxpan Terminal, MexicoProject Contract Awarded: April 2012Project Type: CALM BuoysProject Region: AmericasSOFEC designed and supplied three replacement Catenary Anchor Leg Mooring (CALM) Buoys for PEMEX REFINACIÓN in Mexico, at the Rosarito, Tuxpan and Salina Cruz fields.
Project Location: Rosarita Terminal, Baja CaliforniaProject Contract Awarded: April 2012Project Type: CALM BuoysProject Region: AmericasSOFEC designed and supplied three replacement Catenary Anchor Leg Mooring (CALM) Buoys for PEMEX REFINACIÓN in Mexico, at the Rosarito, Tuxpan and Salina Cruz fields.
Project Location: Tuxpan Terminal, MexicoProject Contract Awarded: April 2012Project Type: CALM BuoysProject Region: AmericasSOFEC designed and supplied three replacement Catenary Anchor Leg Mooring (CALM) Buoys for PEMEX REFINACIÓN in Mexico, at the Rosarito, Tuxpan and Salina Cruz fields.
Project Location: Salina Cruz Terminal, MexicoProject Contract Awarded: April 2012Project Type: CALM BuoysProject Region: AmericasSOFEC designed and procured a tower yoke mooring system for the Cepu oil and gas block located near Bojonegoro, East Java, Indonesia.
Project Location: Banyu Urip Field, IndonesiaProject Contract Awarded: Jan 2012Project Type: Tower YokeProject Region: Asia PacificSOFEC designed, constructed, fabricated and delivered an external mooring system for the FSO UOTE.
Project Location: UOTE Field, BrazilProject Contract Awarded: Jan 2012Project Type: External TurretProject Region: AmericasSOFEC designed and procured a spread mooring system for the FPSO Cidade de Mangaratiba – MV24 located in the Cernambi Sul field in Santos Basin.
Project Location: Cernambi South Field, BrazilProject Contract Awarded: Sept 2011Project Type: Spread MooringProject Region: AmericasSOFEC will design, construct and installea CALM terminal for crude oil, bunker fuel, gasoil, kerosene and gasoline and fuel oil.
Project Location: Barber's Point, Hawaii, USAProject Contract Awarded: Sept 2011Project Type: CALM BuoysProject Region: AmericasSOFEC designed and procured a tower yoke mooring system for the HYSY113 FPSO.
Project Location: BZ25-1S Field, ChinaProject Contract Awarded: July 2011Project Type: Tower YokeProject Region: Asia PacificSOFEC designed, constructed and supplied an external cantilevered bow turret system for a 357,000 dwt FPSO vessel. The OSX-3 FPSO is located within block BM-C-39 of the Campos Basin, offshore Brazil, on the Waikiki Pero Inga fields in 110m water depth.
Project Location: Waikiki Pero Inga Fields, BrazilProject Contract Awarded: June 2011Project Type: External TurretProject Region: AmericasUnder contract to IHI Corporation, SOFEC was responsible for the design and construction of an external turret system and flexible riser system. SOFEC’s responsibilities included the design of the subsea pile-based pipeline end manifold (PLEM) and turret support structure (TSS).
Project Location: Erawan Field, Gulf of ThailandProject Contract Awarded: Jan 2011Project Type: External TurretProject Region: Asia PacificSOFEC designed, constructed, and installed a CALM Buoy system for the SHELL Malampaya Deep Water Gas to Power project.
Project Location: Palawan Island, PhilippinesProject Contract Awarded: Nov 2010Project Type: CALM BuoysProject Region: Asia PacificSOFEC designed and procured a spread mooring system for the FPSO Cidade de São Paulo – MV23 which is deployed in the Guará field in Santos Basin.
Project Location: Guara Field, BrazilProject Contract Awarded: June 2010Project Type: Spread MooringProject Region: AmericasSOFEC designed, constructed, and supplied one (1) Catenary Anchor Leg Mooring (CALM) system for Oil Search Limited to be installed in the Gulf of Papua, Papua New Guinea.
Project Location: Gulf of Papua, New GuineaProject Contract Awarded: June 2010Project Type: CALM BuoysProject Region: Asia PacificSOFEC designed, constructed, and supplied one (1) Catenary Anchor Leg Mooring (CALM) system for Nagarjuna Oil Corporation Limited (NOCL) to be installed in the southeast coastal waters of India, 24km south of the town of Cuddalore, in Tamil Nadu state.
Project Location: Nagarjuna, IndiaProject Contract Awarded: June 2010Project Type: CALM BuoysProject Region: Asia Pacific